Water Heater Stamping Die
Thursday, 19 June 2014 14:20

Air Jet Loom Reed Wire

Air jet loom reed wires production, made by Hiparter, with good reed material and high quality

Die type: Progression die

Die material: SKD11, CR12MOV etc

Part material: Japanese steel SUS301, with thickness of 0.16mm

Usage: Air Jet Loom

Minimum order: 5,000 pieces or one set of reed

 

Air Jet Loom Reed Wire

 

Published in Sheet Metal Parts

Find What You Want

Deep Drawing Dies

Latest Home Appliance Dies

  • Microwave Oven Inner Metal Door
    Microwave Oven Inner Metal Door The microwave oven cavity/chassis and door are made by metal-forming techniques, and then painted by electro-deposition, in which electric current…
    Read 15955 times
  • Air Conditioner Bottom Plate
    Air Conditioner Bottom Plate   Air conditioner back cover manufacturer--Hiparter. 1. Parts material: ST02Z with thickness 1.0mm 2. Mold type: Stage stamping mold 3.…
    Read 8404 times
  • 4 Burners Stainless Steel Gas Cooktop Stamping Die
    4 Burners Stainless Steel Gas Cooktop Stamping Die Die Specifications: Part Material: SUS430; Thickness of material: 0.5mm; Die type: stage die; Stages Quantity: 3; Cavity: 1; Die life:300,000…
    Read 9799 times
  • Air conditioner service back
    Air conditioner service back Specialized in dies & parts for air conditioner service back plates since 2003. Specification 1. Assembling position: right side on…
    Read 8429 times
| + - | RTL - LTR